Shiv Pharma Engineers
Shiv Pharma Engineers


Tablet Compression Machine

Tablet Compression Machine

Tablet Compression machine, Also known as, Tablet Press or Heavy duty Tablet Press Used for very high speed production. Range of the same machine with advanced features -

 

Single Rotary Tablet Compression Machine - 8/10/12 Station

                                                                 16/20/23 Station

 

Double Rotary Tablet Compression Machine - 27 Station M/C.

                                                                35 Station M/C.

                                                                45 Station M/C.

 

Heavy Duty Tablet Press - 37 Station Machine

                                     45 Station Machine

                                     55 Station Machine

                                     61 Station Machine



Heavy Duty Tablet Press

Heavy guty tablet press, also known, rotary tablet press used for high production out put. The machine is eqioped with advanced feature of force feeder, pre-compression, easy speed controls & setting & stringently designed to comply with gmp norms.

 

Description Heavy Duty Machine
Model No. – SPE DRHS37 DRHS45 DRHS55 DRHS61
No. Of Station 37 45 55 61
Out Put Tablets / Minutes 1340 1600 2000 2200
Min. *3700 *5400 *6600 *7300
Max.        
Type Of Dye D B BB BB
Type Of Punch D B B B
Upper Punch Penetration  3 to 8 mm
Turret RPM Range 18/50 18/60 18/60 18/60
Max. Operating Load – Main in Ton 10 6.5 6.5 6.5
Max Pre-Compression Load - Ton 1 1 1 1
Motor HP 7.5 HP/1440 RPM
Feeder Motor 0.5 HP/1330 RPM
Hydraulic Power Pack Cons. 1 HP/1400 RPM


Other Information

  • Pay Mode Terms: L/C (Letter of Credit), D/A (Documents Against Acceptance), D/P (Documents Against Payment)


Dust Extractor GMP

Item Code: SPEDE150-300

Dust Extractor GMP

APPLICATION:

Dust Extractor is used with Tablet Press to control the flying dust generated During High Speed Compression of tablets. Dust Extractor is used to minimize lighter dust problem during tabletting process on tabletting Machine.


SALIENT FEATURES-
  • Over come dust hazards as well as across contamination at table compression
  • Minimizes mechanical strain, excessive wear of tableting machine-resulting in minimum machine break down and punch wears.
  • All inlet manifolds and dust collection tray are of S.S.
  • PVC flexible holes are plain , i.e. without grooves ,for inside for ease in cleaning
  • Air blowing fan is dynamically balanced reduce vibration of machine & noise.

 

TECHNICAL SPECIFICATION

Model - SPE

DES150

DEB300

DEL400

Capacity

150 CFM

300 CFM

 

400 CFM

Suction Capacity-Cu.Feet/Min.

150

300

400

Filtration Area - Square Meter

0.8

1.34

1.9

Dust Storage Capacity - Liters

20

40

50

Electricals Specs.

1  HP

1.5 HP

1.5/2.0 HP

2800RPM/440V/50CS/3PH

Inlet Manifolds

f 38.1 – 04 Nos.

f 62 – 01 Nos.

f 38.1  - 06 Nos.

f 59  - 01 Nos.

f 100  - 01 Nos.

Cabinet (Except Housing for Drawer)

 

SS 304

 

Manifold

SS 316

 

Dust Bag

 

Polypropylene (60 Mesh Size)

 

Drawer

SS 316

Housing For Drawer

SS 316

Cover at Drawer

SS 316 


Tablet De Duster

Item Code: SPETDD

Tablet De Duster

 

APPLICATION

Tablet De-Burring & De- Dusting machine is used to remove burrs-Dust from the Tablets. Machine can perform in line with the tablet compression machine. The out put Tablets of Tablet Compression Machine fall directly in this machine perform the task of removing burrs.

 OPERATION

The equipment works on the principle of vibration. The electromagnet is housed in a dust – free and maintenance free special steel housing, Vibration intensity can be sleeplessly adjusted by means of a Control Circuit.

 

Tablets fall directly from the tabletting machine onto top plate and vibrate around the perforated plate, turning over several times, until they fall through aperture onto the next plate after traveling approximately 3 meters in this phase.

 

Tablet de-dusting and de-burring is performed as the tablet pass over the vibrating multi-level perforated plates. Dust is extracted by vacuum or connected to Dust extracting arrangement. On short fall of vacuum, extra filtered compressed air can be blast on tablets to accelerate de-dusting.

 Technical Specification

 

 

Description/ Model

SPDDSML

SPDDBG

Out Put (Tab/Hour)

200,000 Apprx.

Max. Tablet Dia.

40 mm

40 mm

Min. Tablet Dia.

3 mm

4 mm

Time Adjustment Through Pot

25 to 60 Seconds

 

Power

0.25 Hp / 3 Phase

Hight Adjustment

 

Min. 800 mm.

Max. 930 mm.

Min. 880 mm.

Max. 1100 mm.

Over All Dim (Apprx.)

400X400X930mm

400X400X930mm


23 Station Tablet Compression Machine

Item Code: SPE23TCM

Tablet Compression Machine

APPLICATION

 

The tablet press makes the tablets according to a pre-determined design. Punches and dies set into the tablet press to actually shape the tablets. These machines make tablets for a variety of industries; however, the largest application of tablet compression machine is pharmaceuticals and vitamins.

 

Tablet compression tooling determines the shape and configuration of the finished tablet. Tablets made for human consumption need a design that appears pleasing and easy to swallow. Tablet compression tooling also applies coatings for tablets to make them easier to swallow to prevent dissolution. 

SINGLE ROTARY MACHINE

DESCRIPTION

Single Rotory

Model – SPE

SRTCM16

SRTCM20

SRTCM23

No. Of Station

16

20

23

Tooling Type

D

D/B

B

Max. Out Put - No. of Tablets / Hour

*28800

*36000

*41400

Max. Copmpression Pressure

8

6.5

6.5

Power Consumption ( Motor HP)

2

Turret RPM Range

30

Net Weigth ( Apprx.)

1400

Floor Space Required (Apprx.)

1200 x 1200 x2300

 


SPE Mini Tablet Press

Item Code: SPEMiniTabletPress

SPE Mini Tablet Press

APPLICATION

 Highly used for small batch application for F&D, R&D, ORC & Lab Sclae application.

The tablet press makes the tablets according to a pre-determined design. Punches and dies set into the tablet press to actually shape the tablets. These machines make tablets for a variety of industries; however, the largest application of tablet compression machine is pharmaceuticals and vitamins.

MINI PRESS

DESCRIPTION

Mini / Lab Model

MODEL

SPLRFS8

SPLRFS10

SPLRFS12

No. Of Station

8

10

12

Tooling Type

D

B/D

B/D

Optional

Multi Tooling

Max. Out Put - No. of Tablets / Hour

*14400

*18000

*21600

Max. Copmpression Pressure

6.5

6.5

10

Power Consumption ( Motor HP)

1

Turret RPM Range

16/30

Net Weigth ( Apprx.)

950

Floor Space Required (Apprx.)

850 x 850 x 1850


Other Information

  • Pay Mode Terms: L/C (Letter of Credit), D/P (Documents Against Payment), T/T (Bank Transfer), Western Union
  • F. O. B. Price Order: 4500 USD
  • Minimum Order Quantity: 1 Set
  • Port of Dispatch: Any Indian Port
  • Production Capacity: 5 Per Month
  • Delivery Time: 4-5 Weeks ARO
  • Packaging Details: Export / Sea Worthy Wooden Packing




Contact Us

Shiv Pharma Engineers
Mr. Mayank Joshi (Sales Manager)
34-36, Tejandra Industrial Estate, Opposite C. M. C., Odhav Road
Ahmedabad - 382 415, Gujarat, India


Home  |  Know Us  |  Our Products  |  Trade Offers (20)   |   Site Map  |   Contact Us   |   Mobile Site

© Shiv Pharma Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited